Product Description

High Consistency Cleaner, Cleaner for Pulp Making，Low Consistency Cleaner, Cleaner

 

Huatao Group - Paper Machine And Fabrics

Web: www.papermakingtech.com  www(.)papermakingtech(dot)com

Email: sandy@huataogroup.com    sandy(at)huataogroup(dot)com

Tel: 0086 0311 80690567

WhatsApp: 0086 133 8311 0583

 

High Consistency Cleaner

Description：

High Consistency Cleaner can eliminate heavy impurities larger than 3mm in diameter from recycled paper stock.

As a coarse screening equipment，it is usually a down- stream equipment of hydrapulper. It can also be installed as an important equipment to ensure the operation of down-stream processing equipments.

 

Main Technical Parameters:

Type	HT-11	HT-12	HT-13	HT-14	HT-15	HT-16	HT-17
Throughput（L/min）	800-1200	1400-1800	2000-2800	3000-4500	5000-6000	6500-8000	9000-12000
Inlet Consistency（%）	（H）2.5-5 （M）1-2.5
Inlet Pressure（MPa）	0.15-0.35
Reject	Auto & Manual

 

Low Consistency Cleaner

Application:

HT series low consistency cleaner is suitable for cleaning fiber suspen- sion with the consistency of 0.4-1.2%. It can efficiently

remove light impurities, hot melt impurities, heavy impurities, pulp rejects etc. In addition, it can also remove foam plastics, chips

fragments., ink particles and air efficiently，which results in purifying stock in the approach system prior to paper machine.

It can make coarse screen in the recycled paper fiber efficiently，simplify the processing procedures and reduce power consumption.

Design Features:

It consists of tangent inlet, accept outlet, cylindrical up-part with a plug-in deaeration tube, middle part of cone-type separate tube,

nozzle or lower part of reject discharge controller, etc.

It is a hydrocyclone cleaner. Under the pressure，stock enters the cleaner tangentially and generates high-speed vortex in the cone-tye separate tube, by which.the vortex whose direction of axes near the wall of the separate tube will be directed to the ends of the cone, and the heavier impurities are fung against the wall of the cleaner and discharged at nozzle or by reject controller.The accepts gather in the center of the separate tube to form a main stock flowing from compared with ordinary

L. C. cleaner. It features with a longer separate cone and incorporates a centered deaeration tube，which results in higher effIciency in removing impurities as well as being able to remove light impurities，hot melt ma- terial and air.

When using HTseries low consistency cleaner.almost no jam will happen in the operation, it ensures high effIciency in cleaning stock as well as accepts with high and constant quality.

Main Technical Parameters:

Type	HT-41
Throughput（L/min）	400	600	1000	1500
Inlet Consistency（%）	0.4-1.2
Inlet Pressure（MPa）	0.2-0.3
Outlet Pressure（MPa）	0.06
Pressure Drop（MPa）	0.16
Reject Ratio（%）	10-20

Payment Terms︰ TT LC

Product Image